Elastomer-based systems require controlled storage conditions to preserve structural alignment, surface integrity, and long-term material performance. Proper storage practices significantly influence durability and resistance to deformation over time.

Recommended Storage Conditions

Store in a cool, dry, and well-ventilated environment.

Avoid:

• Direct sunlight
• High heat exposure
• Sudden temperature fluctuations
• High humidity environments

Stable environmental conditions slow material ageing and reduce surface instability.

Horizontal Storage

If stored horizontally:

• Place the model on a soft surface (blanket, mattress, or cushioned base).
• Avoid direct contact with hard flooring or rigid storage containers.
• Support the lower back and legs with cushions to distribute load evenly.
• Slight elevation of the hip area may help reduce prolonged compression stress.

Even weight distribution minimizes localized deformation.

Suspended Storage (Optional)

Suspended storage may reduce compression stress when properly supported.

If used:

• Ensure load distribution is controlled.
• Avoid concentrated pressure on limbs or joints.
• Confirm structural alignment is maintained.

Improper suspension may introduce unintended stress points.

Storage Positions to Avoid

To prevent irreversible structural damage, avoid:

• Long-term unsupported standing
• Prolonged seated positioning
• Direct placement on hard surfaces
• Stacking heavy objects on the body

Continuous vertical or seated load can accelerate surface indentation and internal stress concentration.

Deformation Prevention Principles

Before storage, please return all joints to relaxed, natural alignment and avoid storing in extreme bent or twisted poses. Prolonged tension in stretched positions may lead to gradual surface fatigue.

Load Distribution Awareness

Silicone exhibits elastic recovery properties; however, extended compression may exceed material recovery limits.

Allow periodic load release if the model has been under sustained pressure.

Foot Structure Protection

• Do not allow the feet to bear full body weight during long-term storage.
• Avoid concentrated load on heel or toe areas.

Excessive vertical stress may result in internal framework pressure or localized surface deformation.

Ageing Control & Surface Preservation

Temperature & Thermal Exposure

Keep away from:

• Radiators
• Electric heating blankets
• Heated floors
• High-temperature enclosed spaces

Heat accelerates softening, yellowing, and structural fatigue.

Color Transfer Prevention

During long-term storage:

• Use white or light-colored garments.
• Avoid dark fabrics with unstable dyes.
• Ensure garments are clean and dry.

Pigment migration may become permanent over time.

Internal Moisture Control

Ensure all internal channels (if applicable) are fully dried before storage.

For enclosed storage spaces, moisture absorbers or activated charcoal packs may help maintain dryness.